2009-06-15 22:35:18
Category: SharkEYE Coach
Question:
the camera image is on video2 and shark vision pro hard disk is on video channel 1 so i cant record an image can you tell me whats wrong
2009-06-17 07:20:27
Answering Personnel: SwimRight Admin
Answer:
Mark,
The SharkVISION Pro should be connected to both the AV output and AV input on the SharkEYE Coach, with the two composite leads (RCA -> 3.5mm Jack). When it is connected in this way, you should be able to view the video output from the camera through the SharkVISION Pro by selecting Video 1, and then pressing record on the SharkVISION Pro.
If this does not work, the AV inputs and outputs may be reversed. The AV input on the SC-1.2 should be connected to the AV output on the SP-1, and vice versa. You may want to try swapping the leads over.
Best Wishes,
The SwimRight Team
